Gridded near-surface (2 and 10 m) daily average wind datasets for Australia from 1975 to 2018 have been constructed by interpolating observational data collected by the Australian Bureau of Meteorology (BoM). The new datasets span Australia at 0.05 × 0.05° resolution with a daily time step. The datasets were constructed by blending observational data collected at various heights using local surface roughness information.

The data set contains information on air temperature and relative humidity at heights 1m and 3m from three sensors at each height and a global solar radiation at 3m, mean wind speed and gust speed at 3m measured from the Bowen ratio energy balance Flux tower site, Great Western Woodlands Site.

The data set contains distance measures of primary (wind-borne) and secondary (on ground) seed dispersal during spring, summer and autumn, using empirical observations and detailed measurement of wind characteristics. Seeds were collected from populations of <i>Callitris verrucosa</i> within the reserve and was placed parallel to, and 100 m from the burn edge within the burnt site. For the empirical observation of seed dispersal we chose six release locations, three locations in each of the two sites, about 6 km apart that had both recently undergone a planned burn, one in spring 2009 and the other in autumn 2011. Within those two sites the three release locations were positioned 800 m apart from each other along a transect that was placed parallel to, and 100 m from the burn edge within the burnt site. To assess primary (wind-borne) seed dispersal, 20 randomly chosen seeds were released from each of three different heights (1 m, 2 m and 3 m) at each of the six sites, giving a total of 360 seeds released per season. Seeds were only released within a horizontal wind speed range of 8 - 25 km/h. At lower wind speeds seeds would not take-off and at higher wind speeds seeds could not be relocated. This data set could be reused in a similar study carried out for the same species in a different location. <br> To understand the effect of standing vegetation on the secondary (on-ground) seed dispersal, we established groups of 10 seeds on the ground within 10 m of each of the six previous release locations. Seed were left for 4 days before relocated and distances to the starting point were measured. This was repeated during all 3 seasons. Out of the 180 seeds released,161 (89%) seeds could be relocated. <br> Wind measurements were taken on a sand dune crest in the site that was burned during autumn 2011 using an ultrasonic anemometer (Model WindMaster (Part 1590-PK-020), Gill Instruments Ltd, Lymington, UK). Measurements continued for two weeks in spring, summer and autumn. The anemometer measured horizontal wind speed, horizontal wind direction, and vertical wind speed every 0.1 s, producing a dynamic, three dimensional wind speed vector. Measurements were taken at 2 m height. The data can be used for studies dealing with wind movements in mallee during Spring, Summer and Autumn as well as comparative seed dispersal studies using the same or other wind dispersed plant species.

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The Cape Tribulation flux station was located in the land that is adjacent to the Daintree National Park which is part of the Wet Tropics World Heritage Area (WTWHA). The site is flanked to the west by coastal ranges rising to more than 1400&nbsp;m and to the east by the Coral Sea. The red clay loam podzolic soils are of metamorphic origin and have good drainage characteristics. The metamorphic rocks grade into granite boulders along Thompson Creek which runs along the northern boundary of the site. The crane site itself is gently sloping but the fetch area makes the site one of very complex terrain. The forest is classed as complex mesophyll vine forest (type 1a) and has an average canopy height of 25m. The dominant canopy trees belong to the <i>Apocynaceae</i>, <i>Arecaceae</i>, <i>Euphorbiaceae</i>, <i>Lauraceae</i>, <i>Meliaceae</i>, <i>Myristicaceae</i> and <i>Myrtaceae</i> families. The forest is continuous for several kilometres around the crane except for an area 300&nbsp;m due east of the crane, which is regrowth forest. Annual average rainfall at the site is around 5180&nbsp;mm and is strongly seasonal, with 66% falling between January and April (wet season). Mean daily temperature ranges from 26.6&nbsp;°C in February to 21.2&nbsp;°C in July. </br> <br> Tropical cyclones are a frequent occurrence in Far North Queensland. These severe tropical storm systems are natural phenomena which play a major role in determining the ecology of Queensland's tropical lowland rainforests. In March 1999 Tropical Cyclone Rona (Category 3) passed over the Cape Tribulation area causing widespread damage (gusts >170&nbsp;km/h). At the site several large trees fell, nearly all of the remaining trees were stripped of leaves and the lianas towers were torn to ground level. </br> <br> The flux station was mounted at the 45&nbsp;m level on the tower of the Australian Canopy Crane external link. The canopy crane is a Liebherr 91 EC, freestanding construction tower crane. The crane is 48.5&nbsp;m tall with a radius of 55&nbsp;m enabling access to 1 hectare of rainforest. Fluxes of heat, water vapour and carbon dioxide were measured using the open-path eddy covariance technique. Supplementary measurements above the canopy included temperature, humidity, rainfall, total solar; these measurements have continued post the flux system decommissioning. Heat flux, soil temperature and water content (time domain reflectometry) were measured in proximity to the flux station; these measurements have continued post the flux system decommissioning. Detailed biometric measurements are made at the crane site and all trees have regular (5 yearly) dbh measurements and canopy mapping carried out. Monitoring bores (3) are located on site. Leaf litter measurements are carried out on a monthly basis.

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gatum Pasture flux station, established in February 2015, was located on private farmland in southwestern Victoria, approximately 300&nbsp;km west of Melbourne. The pasture is composed of winter-active perennial grasses (<em>Phalaris aquatica</em> L. and <em>Trifolium subteraneum</em> L.) and is used for sheep and, sporadically, cattle grazing.</br>

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer from an Almond Orchard in South Australia's Riverland, using eddy covariance techniques. <br /> <br /> The Loxton site was established in August 2008 and decommissioned in June 2009. The orchard was divided into 10 ha blocks (200 m by 500 m with the long axis aligned north–south) and the flux tower was situated at 34.47035°S and 140.65512°E near the middle of the northern half of a block of trees. The topography of the site was slightly undulating and the area around the tower had a slope of less than 1.5°. The orchard was planted in 2000 with an inter-row spacing of 7 m and a within row spacing of 5 m. Tree height in August 2008 was 5.5 m. The study block consists of producers, Nonpareil, planted every other row, and pollinators planted as alternating rows of Carmel, Carmel and Peerless, and Carmel and Price. All varieties were planted on Nemaguard rootstock. All but 31 ha of the surrounding orchard was planted between 1999 and 2002. Nutrients were applied via fertigation. Dosing occurred between September and November and in April with KNO3, Urea, KCl, and NH4NO3 applied at annual rates of 551, 484, 647, and 113 kg/ha, respectively. The growth of ground cover along the tree line was suppressed with herbicides throughout the year. Growth in the mid-row began in late winter and persisted until herbicide application in late November. <br> The research was supported with funds from the National Action Plan for Salinity via the Centre for Natural Resource Management, and the River Murray Levy.<br />This data is also available at http://data.ozflux.org.au . <br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Robson Creek site is part of the Far North Queensland (FNQ) Rainforest Site along with affiliated monitoring sites at Cape Tribulation (Daintree Rainforest Observatory) and Cow Bay (Daintree Discovery Centre). The flux station is located at the foothills of the Lamb Range, part of the Wet Tropics World Heritage Area, and north-west of a 25&nbsp;ha census plot established by CSIRO in 2012.</br> <br>The forest is classified as Regional Ecosystem (RE) 7.3.36a, complex mesophyll vine forest (Queensland Government, 2006). There are 211 species in the adjacent 25&nbsp;ha plot, and average tree height is 28&nbsp;m, ranging from 23 to 44&nbsp;m. Elevation of the site is 711&nbsp;m and mean annual precipitation is 2000&nbsp;mm. The upland rainforests of the Atherton Tablelands are some of the most biodiverse and carbon dense forests in Australia. The landform of the 25&nbsp;ha plot which is in the dominant wind direction from the station is moderately inclined with a low relief, a 30&nbsp;m high ridge running north/south through the middle of the plot and a 40&nbsp;m high ridge running north/south on the eastern edge of the plot.</br> <br>The instruments are mounted on a free standing station at 40&nbsp;m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.</br> <br>Note: Level 3 data for 2015 - 2018 were updated in 2018 correcting a rainfall issue in 2015 and a wind direction issue 2016 - 2018. A data gap from 2019-02-14 to 2019-02-21 was due to a major power supply failure.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> Fletcherview Tropical Rangeland SuperSite was established in 2021 at James Cook University’s Fletcherview Research Station, a fully operational outback cattle station located 50&nbsp;km west of Townsville, Queensland. The site is used for cattle grazing and is characterised by tall open savanna. The vegetation is dominated by native grasses such as blackspear and kangaroo grasses, as well as introduced species like buffel grass, signal grass and leucaena. Fletcherview typically experiences a dry and wet season, with most rainfall occurring between January and April.<br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.0) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /><br /> The Great Western Woodlands (GWW) comprise a 16 million hectare mosaic of temperate woodland, shrubland and mallee vegetation in south-west Western Australia. The region has remained relatively intact since European settlement, owing to the variable rainfall and lack of readily accessible groundwater. The woodland component is globally unique in that nowhere else do woodlands occur at as little as 220 mm mean annual rainfall. Further, other temperate woodlands around the world have typically become highly fragmented and degraded through agricultural use. The Great Western Woodlands Site was established in 2012 in the Credo Conservation Reserve. The site is in semi-arid woodland and was operated as a pastoral lease from 1907 to 2007. The core 1 ha plot is characterised by <em>Eucalyptus salmonophloia</em> (salmon gum), with <em>Eucalyptus salubris</em> and <em>Eucalyptus clelandii</em> dominating other research plots. The flux station is located in Salmon gum woodland. For additional site information, see https://www.tern.org.au/tern-observatory/tern-ecosystem-processes/great-western-woodlands-supersite/ . <br /><br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> Great Western Woodlands (GWW) comprise a 16 million&nbsp;ha mosaic of temperate woodland, shrubland and mallee vegetation in south-west Western Australia. The region has remained relatively intact since European settlement, owing to the variable rainfall and lack of readily accessible groundwater. The woodland component is globally unique in that nowhere else do woodlands occur at as little as 220&nbsp;mm mean annual rainfall. Further, other temperate woodlands around the world have typically become highly fragmented and degraded through agricultural use. Great Western Woodlands Site was established in 2012 in the Credo Conservation Reserve. The site is in semi-arid woodland and was operated as a pastoral lease from 1907 to 2007. The core 1&nbsp;ha plot is characterised by <em>Eucalyptus salmonophloia</em> (salmon gum), with <em>Eucalyptus salubris</em> and <em>Eucalyptus clelandii</em> dominating other research plots. The flux station is located in salmon gum woodland.